CLONE 4

Reference 8902RA

€79.90

VAT included

BORN TO FIGHT: Clone 4 is specially designed to accommodate the most demanding configurations and customize your chassis from A to Z. The interior of the chassis has several slots to accommodate your components: ATX, mATX, ITX motherboards, graphics cards up to 345 mm in length, or your CPU ventirad with a maximum height of 160 mm. You can mount up to 4 SSDs...
LIGHT SHOW: Turn off the light and press the power button! Clone 4 offers a unique lighting design. Indeed, its curved façade is equipped with an ARGB LED strip but the most important is located on its tempered glass side wall which reveals the emblematic Spirit Of Gamer badge.
RGB SPECTRUM: Its fan will highlight your components. 60 predefined RGB modes can be easily controlled using the dedicated LED button or directly from the application of your compatible motherboard: ASUS Aura Sync, RGB Fusion Ready, MSI Mystic Light Sync, ASROCK Polychrome Sync. Customizing Clone 4 has never been easier!
AMORED CASE: A clever design because the 4-millimeter tempered glass wall is mounted on hinges, and opens like a window. A small discreet lock allows you to open and close the wall without using tools or screws...
COLD WAR: Slot for 8 fans, Clone 4 comes with 2 pre-installed fans, an ARGB Spectrum fan on the back and a standard fan on the front. Finally, if you wish, you can also install a Watercooling AIO: 360 mm max at the front, a 120 mm max at the rear or a 240 mm max at the top. The power compartment is also designed to isolate the heat from the rest of your setup

LIGHT SHOW

New lighting design
Face LED ARGB
Tempered glass side wall RGB Spirit of Gamer

AMORED CASE

Tempered glass wall 4mm,
on hinges, opens like a window
Practical ON/OFF lock on the front

COLD WAR

Multiple locations:
8 fans, motherboards atx, matx, itx
Graphics cards up to 345 mm in length
Ventirad cpu, 4 ssd disks, watercooling aio...

Key Features: Case format: Medium tower
Max CPU Fan Height: 160 mm
Max graphics card length: 345 mm
Motherboard format: ATX / Micro ATX / Mini ITX
Number of PCI slots: 7 + 2 Verticals
Power Format (PSU): ATX / EPS (not included)
I/O panel: HD Audio: 1 x Jack 3.5mm Audio /1 x Jack 3.5mm Micro
LED indicators
On/Off
On/Off
RGB Controller
Reset
USB: 1 x USB 3.0 / 2 x USB 2.0
Berries: 2.5'' SSD: 4 (2 if HDD 3.5" x 2)
5.25" drive: Not compatible
HDD 3.5": 2
Pre-installed fans (included): Front: 1 X 120 mm
Rear: 1 X 120 mm ARGB
Fan slots (not included): Front: 2 x 120 mm
PSU compartment: 2 x 120 mm
PSU compartment: 2 x 120 mm
Top: 2 x 120 mm or 2 x 140 mm
Supported radiators: Front: 120 / 240 / 280 / 360 mm (Thickness 60 mm max)
Rear: 120 mm
Rear: 120 mm
Top: 120 / 240 mm
Design: Case dimensions (WxDxH): 43.5 x 22 x 45.5 cm
Chassis dimensions (WxDxH): 36 x 21 x 44 cm
Dust filters: 2
Management cable: 20 mm
Materials: Tempered Glass / Steel / ABS (Plastic)
Materials: Tempered Glass / Steel / ABS (Plastic)
Net weight: 6 Kg
RGB Controller: Compatible: Asus Aura Sync, RGB Fusion Ready, MSI Mystic Light Sync, ASROCK Polychrome Sync,
Spirit of Gamer Controller Hub 60 RGB Modes Included (4 Fans Max)